BAGHOUSE TRAPCOAT- Data Sheet
Product Name
Trapcoat - Baghouse fabric, bag surface protective system for air pollution control
Description
It is a very fine, low-density amorphous silica powder
Uses
It is used to precoat the beginning or control layer on the fabric surfaces of the baghouse bags
It is also applicable at a steady feed rate when high concentrations of pollutants exist. This conditioning feed provides continued porosity control, which greatly extends the cleaning cycle
Physical Properties
Color: White pH: 7.0
Bulk Density: 8.75 lbs. per cu ft
Fusion Point: 2300°F
FDA Approved in food processing
Advantages
It traps harsh particles and absorbs hydrocarbons that may cause damage to the bags' fabric
It provides a uniform coat with a porous cake on the surface of the bag and allows maximum throughput
It is dielectric; it minimizes bag damage due to sparks It helps to collect tramp metal
It is environmentally safe; does not contain any crystobolite, tremolite, or asbestos and it can be used in food processing
This lightweight product results in substantial cost savings
Absorption
Water: 300 + % by weight
Oil: 250 + % by weight
Saftey
Refer to Material Safety Data Sheet (MSDS)
Packaging
4 cu ft bags, 40 cu ft Poly-Sacks and 2,200 cu ft Bulk Containers
Sieve Analysis
Trapcoat
| Sieve | Percentage |
|---|---|
| +60 | None |
| +100 | 0.1 - 1 |
| +200 | 2.7 - 8 |
| -325 | 75 - 95 |
PFF-18
| Sieve | Percentage |
|---|---|
| +30 | 3 - 8 |
| +50 | 30 - 50 |
| +100 | 70 - 95 |
| -100 | 95 - 99 |
